Portrait Field Notes · With Martin Castein

Make Direct Flash
Look Natural

Keep the atmosphere. Add a little light. Follow Martin Castein’s street portrait approach with the Viltrox Vintage Z1 Pro.

See the Difference

Daylight Fill · Window Bounce · Night Portraits

F1.4 · 1/250s · ISO 100 · No HSS

A brighter face can still belong to the scene.

In his street portrait film, photographer Martin Castein shows how a small on-camera flash can work with the light already there. He sets the background exposure first, adds a restrained amount of fill, and keeps the character of the location.

His photographs pair the Viltrox Vintage Z1 Pro with the Viltrox AF 35mm F1.4 Pro FE. The lesson begins with a simple decision: how bright should the face be in relation to its surroundings?

01 / Start with the Scene

A Little Fill, a Visible Difference

Heavy direct flash can leave a bright subject against a background that falls into darkness. Martin instead keeps daylight doing most of the work. He also leaves space behind his subject to avoid a hard shadow landing directly on a nearby wall.

In the pair below, he adjusted shutter speed and ISO to preserve the ambient exposure. The street and sky retain their brightness while flash gives the face a small lift. These are two unedited frames taken moments apart, with different poses.

Look at the Background, Then the Face

Without FlashF1.4 · 1/500s · ISO 200
With Gentle FillF1.4 · 1/250s · ISO 100

Background exposure balanced by the photographer: F1.4 · 1/500s · ISO 200 without flash; F1.4 · 1/250s · ISO 100 with flash.

In the detail view, notice the small catchlights and the cleaner illumination across the skin. Martin recognises that some people will prefer the moodier natural-light frame. Gentle fill gives you another way to interpret the same location.

02 / Keep the Atmosphere

Set the Background.
Then Add the Flash.

Martin first looks for good natural light. Flash earns its place when he likes the composition but wants a little more light on the face. Lowering the output helps preserve that relationship with the surroundings.

He also keeps the skin slightly underexposed in this shoot, protecting highlights from the shiny hotspots that too much flash can create. Treat that as his approach to these photographs, rather than a fixed exposure rule for every scene.

A frame in the film is labelled TTL −0.3. It is a useful example of restrained fill, not a setting to copy blindly. Take a test frame, check the skin and background together, and adjust for your subject and distance.

Gentle Fill · TTL Flash Exposure Compensation: −0.3 EV
Natural Light · Flash Off

A Choice of Moods

Good Natural Light Still Comes First

Martin uses natural light for much of his work. In this portrait, he leaves the flash off. Keeping a small flash on the camera lets him choose when to add fill without rebuilding the whole setup.

The aim is to keep the light flexible as the location, expression and framing change.

03 / Find Another Direction

A Window Can Change the Light

The Vintage Z1 Pro has a fixed head. Martin adapts a trick from his wedding work to redirect some of its light.

Display Light OnlyBefore Martin Adds Bounced Flash

Turn, Redirect, Reflect

He turns the camera to portrait orientation and holds his hand at roughly 45 degrees in front of the flash. The hand helps redirect light toward a nearby surface, which can send it back toward the subject from the side.

In this sequence, he uses the shop-window glass as the reflecting surface. The display alone did not give him the face-to-background balance he wanted; bounced flash changes that relationship.

The light also becomes warmer as it picks up colour from his hand and surroundings. Results depend on the surface, angle and distance, so check the frame and adjust.

Watch Martin Demonstrate It
Flash Bounced from the WindowSame Location · A Different Light Balance

04 / After Dark

Let Warm and Cool Work Together

At night, Martin often keeps a difference between the skin and the warm street lights behind it. Matching everything to the same orange tone can reduce the separation he wants in the picture.

His comparison illustrates that preference: the warm-match look is simulated, while the contrasting example keeps more natural-looking skin against a warm background. He lowers flash output and decides how warm the surroundings should remain during the edit.

Warm Match — SimulatedMartin’s Illustrative Colour Treatment
Natural Skin, Warm BackgroundMartin’s Preferred Colour Contrast

A warm gel can be useful when matching the surrounding light is the goal. In this film, Martin is pursuing colour contrast and depth. Choose the balance that supports the portrait you want to make.

The Complete Shoot / 9:25

Watch Martin Work with the Light

Follow the daylight comparisons, window-bounce experiment and night portraits in the original film.

Watch on YouTube

Behind the Photographs

The Kit That Stays with You

Martin values a flash he can leave on the camera and switch on only when the face needs a little more light.

Touchscreen and Dial · From the Film
The Supplied Diffuser · From the Film

Viltrox Vintage Z1 Pro

At approximately 136g, the Vintage Z1 Pro gives him a small, ready-to-use source of fill. In the film, he moves between TTL and manual mode using the rear touchscreen and dial, and uses the supplied diffuser.

USB-C charging keeps the setup straightforward. His one request is an even lower minimum output, a reminder of how little added light he often wants.

  • TTL and Manual Control
  • Approx. 136g / 4.8oz
  • USB-C Charging
  • HSS on Compatible Cameras
Explore Vintage Z1 Pro

Choose the dedicated version for your camera system. TTL, HSS and sync functions depend on the camera model, firmware and settings. Compatibility and Support.

The Lens Used in the Film

Viltrox AF 35mm F1.4 Pro FE

The video description identifies this lens as the one used for every photograph. Its 35mm full-frame perspective keeps the setting in the story, while the F1.4 aperture offers room to work with shallow depth of field.

Explore the Lens

Take It into Your Next Shoot

Keep the Scene.
Give the Face a Little Light.

Find the ambient exposure you like. Add a small amount of flash. Look at the face, the background and the colour together, then make the adjustment your photograph needs.

Photography and original film: Martin Castein. Model: @emsyloo24. Editorial adaptation by Viltrox.

Photographs and behind-the-scenes images are frames from the original film. The film was produced in partnership with Viltrox; the creator’s description includes affiliate links.

Explore More Flashes

Discussion

Comments (0)

No approved comments yet.

Leave a comment

Comments are open to everyone — feel free to share your thoughts!

Previous Post

Share this post

Next Post